Installation of the Frame Sliders / Engine Protectors for the 2009 Kawasaki ER6n is very simple and straightforward but the left hand engine slider can be a little tricky so I put the following instructions together to speed things along:

First thing to do after you've removed the small fairing is remove the horn:


You'll want to remove the bracket that connects the frame to the engine:


Attach the bracket to the slider like this with the Allen bolt and spacer (But do NOT put the nut on the bolt):


Re-attach bracket plus slider to the frame and engine like this:

Make sure the spacers are installed as shown in the picture above.

Here's where that nut goes:


Finally reattach the horn like this:

You're good to go!

Hope these pictures and instructions make sense.

Please let me know if you have any questions.

Thank you again and happy trails!

Marc Anthony (Tony) and Nong and Little Mir AsianConnection71

P.O. Box 71

Ladkrabang Post Office

Ladkrabang, Bangkok   10520

Thailand http://stores.ebay.com/AsianConnection71