In order to print the ring sizer above, be sure that your printer is set to 100%. Make sure that you have not reduced the print size in your printer 'page setup' area.
You can verify that the sizer printed correctly by measuring it with a ruler; the sizer should measure from left to right: 3 3/8 inches.
Once you have printed the sizer, follow these directions to find your ring size:
Wrap a piece of loose string around your finger. Be sure to allow for the size of your knuckle.
With a pen, mark the point on the string where the end meets.
Using the chart, place the end of the string on the left hand border next to the letter, 'A' and stretch along the sizer toward the numbers.
The pen mark will indicate your ring size.
Proper ring sizing is more of a personal preference than a perfect science, so even after following all of these helpful hints, for best results it is recommended that you have your ring size determined by a licensed jeweler.
Many thanks!
) 
