Bread Crumb Link
DevilsOwn
Home About Us Policies Feedback Contact Us
Add To Favorites
  
Best Source for methanol Injection
Best

Where to mount alcohol water injection nozzles

The most common questions regarding where to mount your nozzles for a proper cooling mist. Should you put it close to your Throttle Body? How about on the outlet of your inter cooler? Every Car has there own needs and will react different to different locations. To get these answers go to our site and look for this how to.

Best

DevilsOwn Tank Tap

The tank tap from DevilsOwn requires nothing more than drilling a 7/8" hole in your tank. The taps are self sealing using a durable rubber gasket that expands during installation. The highlight of our tap is the built in filter. Our filter is cone shaped to filter out debris and remain clog free compared to a flat or concave filter. Filtering your fluid is essential given the tiny size of the nozzle orifice.

Water Injection

DevilsOwn strives to be the #1 source for your Methanol/Water Injection System needs. We offer a complete selection of parts and accessories at the best prices.  From our tank tap adapter with incorporated filter, to our streamlined nozzle holder, each part in our system has been engineered to perform at the highest level possible.  We offer a specifically designed 250psi internally bypassed pulse free pump to use with methanol/water injection.  Our nozzles remain rust free and produce a very crisp 80 degree spray pattern.  The DevilsOwnProgressive Methanol Controller is the smallest and most reliable controller on the market.  While other companies say they are the best, our performance proves we are the best.

DevilsOwn's Benefits Include:

  • Increase horsepower safely by 10-15%.
  • Lower air temperatures by 50-200+ degrees.
  • Decrease cylinder temperatures up to 300 degrees.
  • Reduce the effects of heat soak in warmer climates.
  • Allows you to safely run more boost and timing.
  • Reduces carbon and helps maintain a clean combustion chamber.
  • Increases octane at user programmable boost levels.

The main function of water methanol injection is preventing detonation.  Detonation is caused by high temperatures and pressure developed in the combustion chamber.  Water has a high latent heat content, which makes it extremely effective at preventing the onset of detonation.  Water injection also reduces the production of NOx (oxides of nitrogen). Methanol, with its 116 octane and high flash point, further reduces the chances of detonation. While water is not combustible, it has a greater capacity to cool the intake air temps more than methanol alone.  This is why we recommend a 50/50 mixture being misted into your boosted engine.  Methanol also effectively increases the octane rating of the fuel, allowing performance gains when used in supercharged and turbocharged applications.