Is proud to present the world’s most durable and best performing traction studs and snowmobile accessories manufactured by Accord.

To prove it, they back up all of their “XZP” studs with a lifetime warranty against bending or breaking.

KM Studs Specializes in:

Warthog carbide snowmobile steel traction stud; track
These Warthogs are thru-harden heat treated for superior strength and carry the exclusive “XZP” carbide tip that is 44% larger than its competitors. The “XZP” provides a 68° point for excellent penetration, yet increased wear resistance to the competitions 60° point. The “XZP” is also 25% wider in diameter to extend the life of your stud dramatically even in the harshest of conditions. This possibly could be the last set of studs you ever have to purchase!!


Traction Monster carbide steel snowmobile traction stud
Because of vast request, Accord Racing is proud to offer a value line of studs for the price conscience consumer. These are no cheap foreign studs. Traction Monsters are built to the same high standards as the rest of Accord Racing’s lineup. They just carry the industry standard carbide pin as opposed to the “XZP”. This pin is the same size and quality as all the other big name stud manufactures, it just doesn’t compare to the wear resistance, size and performance of the “XZP”. Traction Monsters can be compared to the competitions premium studs, and you will find that they are the very best value in the industry. The Traction Monsters 82º pin will provide the best in wear resistance, and won’t dull off like the competitions 60º pin.


Nylon carbide snowmobile stud track backers all colors
Accord Racing’s macro-lites are the lightest, most durable nylon backers available. They are offered in 6 custom colors that were color matched to the manufactures color schemes available in; black, blue, green, red, yellow, and orange. These backers are available in your chose of round or square with a 5/16” centered hole to meet all your traction backing plate needs.


Aircraft grade aluminum snowmobile stud track backers
Macro aluminum backers are made from the best aircraft grade aluminum that will hold your stud ridged in the toughest of environments. These backers are a must for anyone looking for the lightest, best performance setup available in either round or square to meet your traction needs. These backers have been tested in the harshest of conditions, and surpassed our expectations of any aluminum backer. Great for lake racing, performance riding, hole shots, or just trail riding. You can’t go wrong with these aluminum backers.


Big Al carbide snowmobile stud aluminum support nuts
Every year snowmobile tracks keep getting taller and taller. With this in mind, it is getting harder all the time to keep these longer traction studs from bending or breaking. Accord Racing has the answer with these tall aircraft grade aluminum support nuts. These nuts are available in ½” or ¾” tall depending on the length of stud you are using. (Use ½” for 1.25” and shorter studs and use ¾” for 1.38” and longer studs)


Magnum series carbides; wear bars rods; carbide runners
Accord is proud to manufacture the world’s most durable and best performing traction products, and to prove it, they back up all of their traction products with a manufactures warranty against defects in material and workmanship. Plus they have put a lifetime warranty on all their Magnum Series carbide runners that guarantees the carbide to never fall out!! How can they do this? Magnum series are the ONLY carbide runners brazed on four sides to ensure unmatched holding power of the carbide inserts compared to all other runners that are only brazed on two or three sides.


Sport series carbides; wear bars; rods; carbide runners
These runners carry 6” of 90º steering carbide with two 1” wear pads and hard weld filler wherever there isn’t any carbide. This is the way OEM runners should have been built. Compare to the competition that have little to no wear pads, 4” of 90º carbide, and no hard weld. This is a no brainer. You get so much more for your money, and these are probably cheaper.


Double Down carbide runners; wear bars; carbides; rods
Double Down series carbides have been widely known as the best in the industry with the most carbide wear pads and aggressive 60º steering carbide. They also install hard weld filler wherever there isn’t carbide for added wear resistance and prolonged life. There is no carbide runner that will hold up to the elements like the Double Down runner. These runners have two 7/16” host bars welded to a heavy duty steel plate for superior strength. Double Downs also have the largest spread (in between the host bars) in the industry. At 1 ¼” spread, you don’t have to worry about any ice damning in between the bars like in the competition. Why chose a double runner? These double runners eliminate all darting to assure you a safe ride and give you an unmatched comfort level while steering. Double Downs are like giving your sled power steering.