FRONT PROJECTION SCREEN SURFACES
Textile Backed Screen Surfaces
In this group, the reflective surface is laminated to a woven textile base. The screen surface hangs suitably flat because of the stability of the material and the weight of the bottom dowel.
A matt white surface diffuses projected light in all directions, so image can be seen from any angle. Provides accurate color rendition as well as superior clarity. Recommended for use with all high light output projection devices. Requires control of ambient light in the audience area. Washable, flame and mildew resistant. Seamless in virtually all standard sizes.
Spherical glass beads embedded in surface provide brighter on-axis viewing than matt white, within a narrower viewing cone. Glass beaded surfaces have some loss of clarity and perform best with table-mounted projectors. Flame and mildew resistant; cannot be cleaned. Seamless in standard sizes through 10’ high.
High Contrast Grey
Grey, textile-backed surface offers excellent resolution while enhancing the blacks of LCD and DLP projected images, even as whites and lighter colors are maintained. Performs well in ambient light. Lower gain of 0.8 allows use with even the brightest projectors. Available on most non-tensioned motorized and manual screens, seamless in sizes through 8' high. Viewing cone of 180°
The most innovative and versatile acoustically transparent screen material. Similar in gain performance to Matt White and does not require tensioning for flatness. Acoustical properties comparable to the finest speaker grille cloth. Washable, flame and mildew resistant. Available in sizes through 72" x 96" or 10' diagonal. Not recommended for screens smaller than 80" wide when used with LCD or DLP projectors.
Offers the acoustical properties of our popular AT1200, while providing the best optical qualities of both Matt White and High Contrast Grey. It is unique in that it offers both a 180° viewing cone and the vivid color contrast associated with high contrast grey materials. Washable, flame and mildew resistant. Gain of 0.8. Available in sizes through 72" x 96" or 10' diagonal. Not recommended for screens smaller than 80" wide when used with LCD or DLP projectors. (Not available on screens less than 80" wide.)
FRONT PROJECTION SCREEN SURFACES
100% Vinyl Screen Materials
These screen surfaces are tensioned vinyl with no backing. Draper offers these surfaces on motorized, crank-operated and permanently tensioned screens with built-in tensioning systems. The surface is stretched perfectly flat, resulting in better picture quality. Flatness is always desirable, particularly for video or data-graphics projection.
A grey front projection surface that provides excellent contrast and black reproduction, with a low gain to handle today's super-bright projectors. The grey color enhances color contrast, black levels and allows for more ambient light in the audience area. Available in sizes through 9' x 9', or 9' high in greater widths.
The perfect matt white diffusing surface. Extremely broad light dispersion and spectral uniformity. Panoramic viewing angle and true color rendition. Recommended for use with any type of projector in rooms where the light level can be reasonably controlled. Washable.
A high-contrast front viewing surface, with excellent resolution and high gain. For data-graphics projectors producing through 1000 ANSI lumens. M2500 tolerates a higher ambient light level than most other front projection screen surfaces.
Flexible Matt White
Pliable matt white material for use in our portable folding screens. It can be stretched, folded and restretched repeatedly without damage. Flexible matt white is an excellent matt white material with a gain of 1.0 and a viewing cone of 180°.
REAR PROJECTION SCREEN SURFACES
A neutral grey vinyl for rear projection. Cineflex has high resolution and excellent contrast, even in lighted rooms. For use with any type of projection equipment.
Feel free to contact us with any questions.