|
| The Tavern was all made from balsa wood. For the floor I used a base of ordinary art mounting board which was first stained with walnut wood stain on both sides to reduce buckling. I then used 1/16 inch thick balsa wood which came in strips of 3" x 36". These were also stained on both sides with the walnut stain. I then cut the strips into 3" squares and stuck them on to the mounting board using a 3/32 thick piece of balsa to space them out. The reason for this was so that the bar which was made from 3/32 balsa, would sit into the gaps without being knocked out of position too easily. |  |  | | | |
|
|
) 
