OxiSolv Blade & Bit Cleaner is an environmentally safe cleaner designed to effectively clean saw blades, power bits and planer knives.

OxiSolv Blade & Bit Cleaner requires no special equipment and utilizes low man hours for application. The product in its virgin form is bio-degradable and non- flammable.

OxiSolv Blade & Bit Cleaner cleans resin, pitch, gum and grime from metal and other non-absorbent surfaces. No more grinding, scraping, sandpaper or steel wool.

OxiSolv Blade & Bit Cleaner cleans all types of ferrous and non-ferrous metals: steel, iron, aluminum, brass, bronze and chrome.

OxiSolv Blade & Bit Cleaner needs no mixing and comes ready to use. Parts should be dipped or sprayed until thoroughly wetted. Allow product to penetrate for 5 minutes, or longer if necessary, then use a water rinse with pressure or wipe down. Product can be re-used until it becomes ineffective.

In dipping operations, the product should be warm to the touch (approximately 110F) for best results. Skim off oil and grease from surface to prolong product usage.

OxiSolv Rust Remover is an environmentally safe rust remover designed for consumer use to dissolve rust and remove oxidation, while coating parts with zinc phosphate to inhibit further rusting.

OxiSolv Rust Remover requires no special equipment and utilizes low man hours for application. The product in its virgin form is biodegradable and non-flammable

OxiSolv Rust Remover etches metal for better paint adhesion and better conductivity for welding operations.

OxiSolv Rust Remover is laboratory approved by several of the world's largest manufacturing concerns, and has passed paint adhesion and 500 hour spray tests. Materials cleaned and zinc phosphate coated will remain rust-free for many months of storage. (Indoor or outdoor storage life depends upon how long parts are treated in OxiSolv solution.) Use on steel, copper, brass, bronze, aluminum and nickel. This product can be re-used without losing its ability to remove rust and phosphatize

OxiSolv Degreaser Cleaner Concentrate is an environmentally safe cleaner designed to effectively clean grease and oil from steel, metals and other non-absorbent surfaces.

OxiSolv Degreaser Cleaner Concentrate requires no special equipment and utilizes low man hours for application. The product in its virgin form is bio-degradable.

OxiSolv Degreaser Cleaner Concentrate cleans grease and oil from metal and other non-absorbent surfaces.

OxiSolv Degreaser Cleaner Concentrate is also safe for most washable surfaces in the office or shop when diluted. Use in offices, restrooms, workbench areas, wherever dirt, stains and grease are a problem.

OxiSolv Degreaser Cleaner Concentrate can be used on all types of ferrous and non-ferrous metals: steel, iron, aluminum, brass, bronze and chrome.

Parts should be dipped or sprayed until thoroughly coated. Allow product to penetrate for 5 minutes. Rinse thoroughly with water and wipe down.

For use on non-absorbent surfaces, dilute OxiSolv Degreaser Cleaner Concentrate with water and spray until thoroughly wetted (dilution rate depends on material being cleaned). Allow product to penetrate for 1 to 2 minutes, then use a water rinse or wipe down.