|
This picture shows the back side of the mannequin with the hook attached.
There are two (2) nuts, one (1) on the top (the top nut may or may not be a lock washe nut) and one (1) on the bottom.
Notice the crimp in the metal just above the top nut. It should be facing the back (hollow side) of the mannequin.
When hanging from a rack, the nuts should be tight. If hanging from a door or other flat surface, loosen the bottom nut to allow the hook to move backwards towards the wall or door. Ths wil allow the mannequin to lay flush against the surface. | 
) 
