|
Iron On Embroidered Appliqués & Iron On Rhinestones Instructions (For House Hold Iron)
|
|
Embroidered Appliqués & Patches |
Rhinestones & Rhinestuds Motifs Appliqués |
|
1. Set your hand iron at the hottest temperature setting |
1. Set Temperature at 350 ?F, Steam OFF |
|
2. Place your appliqués where you desire and place a pressing
cloth over the appliqué |
2. Remove the white plastic backing from the transfer
|
|
3. Press the iron down on the appliqué and hold it for 30 – 40
seconds. (add as much pressure as possible) |
3. Place the transfer face up on the fabric
|
|
4. Turn the garment inside out and repeat steps 1 – 3 |
4. Press directly on the clear heat resistant film for 30 seconds |
|
5. Let the appliqué cool down |
5. Move iron in smooth motion to insure that all rhinestones are
heated throughout for at least 10 seconds |
|
|
6. Let it cool for several minuets and slowly peel off the film |
|
|
7. If any stones will come off with the film – reapply them by heating them with iron’s tip |
|
|
8. After all stones are securely attached, iron it from inside out for 30 more seconds |
|
|
9. For heavy fabric such as Denim, add additional 15 seconds for
both the front & the back |
|
|
When apply to shirts put a piece of cloth between the Front & the Back layer to prevent adhesive from gluing on the back layer
|
Do not apply to fabrics with a low melting point without testing first. Pretest dark colored or non reactive dyed fabric for color change from heat. |
|
Washing Instructions: Turn garment inside out and machine wash on gentle cycle. Tumble dry, low heat. When applied properly, is machine washable and dry cleanable. |
) 
