Neoprene Installation Guide:

The overall Genuine CR-grade Neoprene Seat Cover installation process consists of several stages and they are detailed below:
 
Neoprene Backrest Seat Cover Installation:

1. You can easily install the Genuine CR-grade Neoprene Backrest Seat Cover over bucket seats with non-removable headrest simply by pushing the seat forward and putting the backrest seat cover around the original seat cover.

2.  In certain other seats, the Velcro fastener is attached to the flap after the flap is pushed through the opening between the seat bottom and seat back. After that, wrap the Genuine CR-grade Neoprene Backrest Seat Cover around the original car seat.

3.  In order to install the Genuine CR-grade Neoprene Backrest Seat Cover over 60/40 split bench seats, take away the headrest first. Next, fold the seat properly forward while you pass the flap through the opening induced between seat back and seat bottom. Now, fix the Velcro fastener and drape the backrest seat cover over your car seat.

4. It is definitely easier to install the Genuine CR-grade Neoprene Backrest Seat Cover over older jeep models. Just fold the seats forward and drape the Neoprene Backrest Seat Cover over them.
   
Neoprene Solid Bench Seat Cover Installation:

1. You can easily install the Genuine CR-grade Neoprene Solid Bench Seat Cover by folding the seat forward in a proper manner. Once the seat is folded, drape the backrest cover over the backrest and if a folding armrest is attached to the seat, place the backrest cover in the top high position, above the armrest. But if the seat is equipped with a headrest, do remove the headrest before you move ahead to install the Neoprene Solid Bench Seat Cover.

2. In the next step, insert the flap through the opening between seat back and seat bottom.

3. Now cover the seat bottom with the seat bottom cover and fix the straps at the right position.
 
Neoprene Seat Bottom Cover Installation:

Genuine CR-grade Neoprene Seat Bottom Cover installation process involves various steps. In the very first step, fold the seat forward and drape the Neoprene Seat Bottom Cover over the original seat cover. Next, pass the flap through the attached buckles and hooks and then finally tuck the extra seat bottom cover behind the plastic pieces.

Neoprene Console Cover Installation:

In the first place, open the console and then place the console cover over the console top and console bottom. Now, push the bottom flap through the opening between console top and console bottom and finally fix the Velcro fastener. 

Other Neoprene Seat Cover Installation Instructions:

1. You need to induce an opening in your Genuine CR-grade Neoprene Seat Cover for levers and controls that are especially necessary for your seat support.

2. However, if you have seats with integrated seat airbags, cover these seats only with Neoprene Seat Cover designed with opening flaps for adequate protection. For installation, the flap is to be inserted first. But while inserting the flap, bear in mind that it has to be pushed in a way that it can be effortlessly opened during use.

3. You need to fix the Velcro fastener for successful installation of your Genuine CR-grade Neoprene Armrest Cover.

Genuine Leather Installation Guide:

You need to adopt a couple of installation steps to install Genuine Leather Backrest Seat Cover, Genuine Leather Solid Bench Seat Cover, Genuine Leather Seat Bottom Cover and Genuine Leather Console Cover properly. These installation guidelines are detailed below:

Genuine Leather Backrest Seat Cover Installation:

For the installation of Genuine Leather Backrest Seat Cover on bucket seats with non-removable headrest, fold the seat cover forward and then put the Genuine Leather Backrest Seat Cover around the original seat cover.  

In other seats, the flap is first inserted via the opening between seat back and seat bottom and then the Velcro fastener is fixed to the flap. Then the Genuine Leather Backrest Seat Cover is put around the original seat cover.   

To install the Genuine Leather Backrest Seat Cover on 60/40 split bench seats, remove the headrest first. Next, fold the seat forward and insert the flap via the opening between the seat back and seat bottom. Then fix the Velcro fastener at its proper position and install the Genuine Leather Backrest Seat Cover around the original seat cover.

You can install the Genuine Leather Backrest Seat Cover properly on comparatively older jeep models by folding the seat forward. After folding the seat, just drape the backrest seat cover around the original seat cover.

Genuine Leather Solid Bench Seat Cover Installation: 

In the first place, fold the seat forward and then cover the backrest with the backrest cover.  Now, if the solid bench seat is equipped with a headrest, remove the headrest before installing the Genuine Leather Solid Bench Seat Cover and altogether if the seat has a folding armrest, just place the Genuine Leather Solid Bench Seat Cover high up the armrest.

Push the flap through the opening between seat back and seat bottom.

Finally, drape the seat bottom cover around the seat bottom and fix straps.

Genuine Leather Seat Bottom Cover Installation:  

Just fold the seat forward and then drape the Genuine Leather Seat Bottom Cover over the original seat cover. Now, insert the flap through and fasten buckles and hooks. When you are over with fastening buckles and hooks, finally hide the seat cover behind the plastic material pieces.

Genuine Leather Console Cover Installation:  

The Genuine Leather Console Cover Installation process involves three steps and they are as follows:

First of all, open the console.

Thereafter, install the console cover over the console top and console bottom.

Now, after installing the console cover, insert the flap through the opening and finally fasten the Velcro fastener.

Other Genuine Leather Seat Cover Installation instructions

Only use Genuine Leather Seat Cover designed with opening flaps or airbag cut outs to cover Seats with integrated seat airbags. However, to install Genuine Leather Seat Cover designed with opening flaps; insert the flap via the cut out in such a way that it can be easily opened freely when required.

You can effortlessly install the Genuine Leather armrest cover by fastening a Velcro fastener.

Altogether, you are also required to induce a  small opening in the Genuine Leather Seat Cover for levelers or controls that are mostly used for the purpose of supporting your seat.

Ballistic Installation Guide:

You need to follow simple installation steps for successful installation of Ballistic Backrest Seat Cover, Ballistic Solid Bench Seat Cover, Ballistic Seat Bottom Cover and Ballistic Console Cover. These installation procedures are mentioned below:

Ballistic Backrest Seat Cover Installation:

To install the Ballistic Backrest Seat Cover over bucket seats with non-removable headrest, just push the seat forward and place the Ballistic Backrest Seat Cover around the original seat cover.

In other seats, the Velcro fastener is fastened to the flap after inserting it through the opening between seat back and seat bottom. After that, you can easily drape the Ballistic Backrest Seat Cover around the original seat cover.

To install the Ballistic Backrest Seat Cover over 60/40 split bench seats, first of all, remove the headrest. Then, fold the seat forward and insert the flap via the opening between seat back and seat bottom. Now, fix the Velcro fastener and then cover your original car seat with the Backrest Seat Cover.

However, to install Ballistic Backrest Seat Cover on older jeeps, you just need to fold the seat forward and then you can easily cover the original car seat with the Ballistic Backrest Seat Cover.

Ballistic Solid Bench Seat Cover Installation:

Fold the seat forward first and then cover the backrest with the backrest seat cover. If your car seat has a folding armrest, then for hassle-free installation, you are instructed to place the backrest cover in the top position, above the armrest. However, if your car seat has a headrest, remove the headrest first and then place the Solid Bench Seat Cover over the original car seat.

Now, push the flap via the opening between seat back and seat bottom and then place the seat bottom cover over the seat bottom and fix the straps properly.

Ballistic Seat Bottom Cover Installation:

For successful installation of your Ballistic Seat Bottom Cover, fold the seat forward first and then place the Ballistic Seat Bottom Cover around the original car seat cover. Now, you are required to insert the flap via the fixed buckles and hooks and then you can easily tuck the ballistic seat bottom cover behind the plastic pieces.

Ballistic Console Cover Installation:

This is a simple procedure and it involves opening the console and then covering the console top as well as the console bottom properly. After that, insert the flap via the opening and then affix the Velcro fastener.

Other Instructions on Ballistic Seat Cover Installation:

To cover seats with integrated seat airbags, you should only use ballistic seat cover designed with opening flaps. The ballistic seat cover equipped with opening flaps or airbag cut outs can be easily installed by inserting the flap through the cut out in such a way that it can be freely opened during use   

To install your ballistic seat cover over levelers or controls that are used to support your seat, you need to make a small opening in your ballistic seat cover.

Fix a Velcro fastener to install the ballistic armrest cover.

Poly Cotton Installation Guide:

For easy and successful installation of Poly Cotton Seat Covers, you are required to adopt certain definite installation steps. Step-by-step installation instructions for all Poly Cotton Seat Covers, namely, Poly Cotton Backrest Seat Cover, Poly Cotton Solid Bench Seat Cover, Poly Cotton Seat Bottom Cover and Poly Cotton Console Cover are included below:

Poly Cotton Backrest Seat Cover Installation

To install the Poly Cotton Backrest Seat Cover around bucket seats with non-removable headrest, fold the seat forward and then cover the original seat cover with the Poly Cotton Backrest Seat Cover.   

In other car seats, to effectively install Poly Cotton Backrest Seat Cover, first insert the flap through the opening between seat back and seat bottom. Now, install the Velcro fastener and then cover the original seat cover with the Poly Cotton Backrest Seat Cover.

For successful installation of Poly Cotton Backrest Seat Cover on older jeep models, just fold the seat forward first and then cover the original seat cover with the Backrest Seat Cover.

You can easily install the Poly Cotton Backrest Seat Cover around 60/40 split bench seats by simply following these steps:

1. Remove the headrest.

2. Now, fold the seat forward and insert the flap between the seat back and seat bottom.

3. Now, fix the Velcro fastener and place the Poly Cotton Backrest Seat Cover across the original seat cover.

Poly Cotton Solid Bench Seat Cover Installation

Fold the seat forward first and then drape the backrest cover around the backrest.

Now, if the Solid Bench Seat is equipped with an armrest, you should position the backrest cover at a top high position, above the armrest and if the Solid Bench Seat has a headrest you are required to remove it before proceeding ahead to install the Poly Cotton Solid Bench Seat Cover.

Poly Cotton Seat Bottom Cover Installation

Just fold the seat forward and then cover the original seat cover with the Poly Cotton Seat Bottom Cover.

Now, insert the flap through the fixed buckles and hooks and then tuck the additional Poly Cotton Seat Bottom Cover behind the plastic material.

Poly Cotton Console Cover Installation

In this installation process, you need to open the console first and then cover the console top and the console bottom.

After covering the console top as well as the console bottom, push the flap through the opening between console top and console bottom and fasten the Velcro fastener.

Other Installation Instructions

Other than the aforementioned installation guidelines, you are required to follow certain other installation instructions for successful installation of your Poly Cotton Seat Cover. These are included below:

You are required to make a small opening in your Poly Cotton Seat Cover to install it over levelers/controls that are used to support your seat.

Only Poly Cotton Seat Covers designed with opening flaps or airbag cut outs are meant to cover car seats equipped with integrated seat airbags.  However, during installation, push the flap through the cut out in such a manner that it can be easily and freely opened during use.

While installing Poly Cotton armrest cover, don’t forget to fasten the Velcro fastener.

Saddle Blanket Installation Guide:

The Saddle Blanket Seat Covers can be installed properly by adopting the installation steps included below:

Saddle Blanket Backrest Seat Cover Installation: 

To install Saddle Blanket Backrest Seat Cover over bucket seats with non-removable headrest, simply fold the seat forward and then properly install the backrest seat cover over the original seat cover.

In other specific seats, to install the Saddle Blanket Backrest Seat Cover, you may need to insert the flap via the opening between seat back and seat bottom and then fasten the Velcro fastener. After fastening the Velcro fastener, just drape the Saddle Blanket Backrest Seat Cover over the original seat cover.

However, to install the Saddle Blanket Backrest Seat Cover over older jeeps, you need to fold the seat forward and then you can easily cover the seat with your Saddle Blanket Backrest Seat Cover.

Before installing the Saddle Blanket Backrest Seat Cover over 60/40 split bench seats, remove the headrest first. Next, fold the seat forward and insert the flap through the opening between seat back and seat bottom. Now, fasten the Velcro fastener and then you can simply put the Saddle Blanket Backrest Seat Cover around your original seat cover.

Saddle Blanket Solid Bench Seat Cover Installation:

To install the Saddle Blanket Solid Bench Seat Cover successfully, fold the seat forward and then cover the backrest with the backrest cover. Now, if the seat has an armrest, you need to position the backrest in the top high position and if the seat has a headrest, remove it before draping the Saddle Blanket Solid Bench Seat Cover around your original car seat cover.

Saddle Blanket Seat Bottom Cover Installation:

Just fold the seat forward and then install the Saddle Blanket Seat Bottom Cover around the original seat cover. Next, attach buckles and hooks, insert the flap through and finally hide the extra Saddle Blanket Seat Bottom Cover behind the plastic pieces.

Saddle Blanket Console Cover Installation:

To install the Saddle Blanket Console Cover properly, simply follow the installation steps mentioned below:

Open the console and

Attach the console cover over the console top and console bottom.

Now, insert the flap through the opening between the console top and console bottom and affix the Velcro fastener.

Specific Instructions On Saddle Blanket Seat Cover Installation:   

Only Saddle Blanket Seat Covers designed with opening flaps or airbag cut outs are meant for covering seats with integrated seat airbags. To install your Saddle Blanket Seat Cover equipped with opening flaps, just insert the flap through the cut out in such a manner that it can be easily opened during use.

An opening in your Saddle Blanket Seat Cover is required for levers and controls that are necessary for your seat support.

Your Saddle Blanket armrest cover can be adequately installed by fastening a Velcro fastener.

Spacer Mesh Installation Guide:

Spacer Mesh Backrest Seat Cover Installation: 

For the installation of Spacer Mesh Backrest Seat Cover around bucket seats with non-removable headrest, just fold the seat forward properly and then cover the original seat cover with the Spacer Mesh Backrest Seat Cover.

To install Spacer Mesh Backrest Seat Cover around certain other seats, insert the flap via the opening between seat back and seat bottom and then fasten the Velcro fastener. Now, you can easily place the Spacer Mesh Backrest Seat Cover around the original seat cover.

You can easily install the Spacer Mesh Backrest Seat Cover on older jeep models by folding the seat forward and then covering the original seat cover with the Spacer Mesh Backrest Seat Cover.

For successful installation of Spacer Mesh Backrest Seat Cover around 60/40 split bench seats, you need to remove the headrest first. Then you need to fold the seat forward and simultaneously insert the flap through the opening between seat back and seat bottom. Then, fasten the Velcro fastener and place the Spacer Mesh Backrest Seat Cover around the original car seat cover.

Spacer Mesh Solid Bench Seat Cover Installation:

In the very first step, fold the seat forward and then cover the backrest with the backrest cover.

If the Solid Bench Seat has an armrest, you are instructed to place the backrest cover at a high position above the armrest and if the Solid Bench Seat is equipped with a headrest, you need to remove it before moving ahead to place the Spacer Mesh Solid Bench Seat Cover around the original seat cover.

Spacer Mesh Seat Bottom Cover Installation:

Fold the seat forward and then drape the Spacer Mesh Seat Bottom Cover around the original seat cover.

Now, insert the flap via the fixed buckles and hooks and then tuck the additional Spacer Mesh Seat Bottom Cover behind the plastic pieces.

Spacer Mesh Console Cover Installation:

The Spacer Mesh Console Cover installation process consists of three steps and these are detailed below:

In the very first step, open the console.

Now, move on to cover the console top and the console bottom properly.

After covering the console top as well as the console bottom, push the flap via the opening between console top and console bottom and finally fasten the Velcro fastener.

Other Spacer Mesh Seat Cover Installation Instructions:

Apart from the installation guidelines mentioned above, you are required to follow certain other installation instructions for successful installation of your Spacer Mesh Seat Covers. These installation instructions are included below:

To install your Spacer Mesh Seat Cover around levelers/controls, you are required to make a small opening in your seat cover.

Use Spacer Mesh Seat Covers designed with opening flaps or airbag cut outs only to wrap around seats with integrated seat airbags. However, for successful installation, you need to push the flap through the cut out in such a way that it can be effortlessly opened during deployment.

For successful installation of your Spacer Mesh armrest cover, fasten the Velcro fastener.

Tweed Installation Guide:

The installation process of Tweed Seat Covers is summarized below.

Tweed Backrest Seat Cover Installation:

To install Tweed Backrest Seat Cover over bucket seats with non-removable headrest, simply adopt the 2 steps mentioned below:

Fold the seat forward properly.

Now, drape the Tweed Backrest Seat Cover around the original seat cover.

In certain others seats, the Tweed Backrest Seat Cover can be effortlessly installed by pushing the flap through the opening between the seat back and seat bottom and thereafter you can easily fix the Velcro fastener. After affixing the Velcro fastener, it becomes much easier for you to put the Tweed Backrest Seat Cover around the original seat cover.

To install the Tweed Backrest Seat Cover around 60/40 split bench seats, first of all, you need to remove the headrest. As the headrest is removed, fold the seat forward and push the flap via the opening between the seat back and seat bottom. Now, fix the Velcro fastener and simply cover the original seat cover with the Tweed Backrest Seat Cover.

For the installation of Tweed Backrest Seat Cover around older jeeps, just fold the seat forward and then wrap the Tweed Backrest Seat Cover over the original seat cover.

Tweed Solid Bench Seat Cover Installation:

The Tweed Solid Bench Seat Cover installation process begins with folding the seat forward and then draping the backrest cover over the backrest. Now, if the Solid Bench Seat has a headrest, you need to remove it properly before placing the Tweed Solid Bench Seat Cover around the original seat cover and if the seat is equipped with an armrest, put the backrest cover in the top high position above the armrest.

Tweed Seat Bottom Cover Installation:

To install the Tweed Seat Bottom Cover successfully, first of all you are required to fold the seat forward and then you can easily drape the Tweed Seat Bottom Cover around the original seat cover. Now, push the flap through the fixed buckles and hooks and then hide the extra Tweed Seat Bottom Cover behind the original plastic pieces.

Tweed Console Cover Installation:

Tweed Console Cover Installation process can be completed by adopting a few steps. These steps are detailed below:

First of all, open the console.

Next, cover the console top and the console bottom.

Now, insert the flap through the opening and fix the Velcro fastener.

Other Tweed Seat Cover Installation Instructions:

To cover seats with integrated seat airbags, use Tweed Seat Cover designed with opening flaps or airbag cut outs. To install this Tweed Seat Cover, insert the flap via the cut out in such a manner that it can be opened easily and freely during deployment.

You need to make a small opening in your Tweed Seat Cover to install it around levelers/controls that are generally utilized to support your seat.

To install the Tweed armrest cover, simply fix the Velcro fastener.

Velour Installation Guide:

Velour Backrest Seat Cover Installation:

Install your Velour Backrest Seat Cover over bucket seats with non-removable headrest by folding the seat forward and then by covering the original seat cover with the backrest seat cover. 

In other seats, to install your Velour Backrest Seat Cover, push the flap through the opening between the seat back and seat bottom and then fix the Velcro fastener. Now, you can easily cover the original seat cover with your Velour Backrest Seat Cover.

However, in order to install the Velour Backrest Seat Cover around 60/40 split bench seats, remove the headrest first. Next, fold the seat and then push the flap through the opening between seat back and seat bottom. Thereafter, attach the Velcro fastener and cover the original seat cover with the Velour Backrest Seat Cover.

For the installation of Velour Backrest Seat Cover around older jeeps, just fold the seat forward and thereafter you can effortlessly cover the original seat cover.

Velour Solid Bench Seat Cover Installation:

The Velour Solid Bench Seat Cover installation process includes certain definite steps and these are included below:

First of all, before covering the backrest with the backrest seat cover, fold the seat forward for successful installation. If your car seat is equipped with a headrest, you are required to remove the headrest before draping the original car seat with the Velour Solid Bench Seat Cover. In case, your car seat has a folding armrest, you need to install the backrest cover in a top high position, above the armrest.

Next, push the flap through the opening between the seat back and seat bottom. Thereafter, place the seat bottom cover over the seat bottom and attach the straps.

Velour Seat Bottom Cover Installation:  

Just fold the seat forward and then put the Velour Seat Bottom Cover around the original seat cover.

Now, push the flap though the attached buckles and hooks and then tuck the Velour Seat Bottom Cover behind the plastic pieces.

Velour Console Cover Installation:

Velour Console Cover can be installed successfully by adopting the installation steps mentioned below:

Open the console first.

In the next step, drape the Velour Console Cover around the console top and the console bottom properly.

Then, insert the flap through the opening between console top and console bottom and after that fix the Velcro fastener properly.

Other Velour Seat Cover Installation Instructions:

Seats with integrated seat airbags can be covered only with Velour Seat Cover designed with opening flaps. However, to install Velour Seat Cover equipped with opening flaps, push the flap through the cut out in such a way that you can easily open it during deployment.

Levelers/ controls are commonly used for your seat support and in order to install your Velour Seat Cover around levelers or controls, you are required to make a small opening in your Velour Seat Cover.

Fasten a Velcro fastener and complete installation of your Velour Seat Cover.

NeoSupreme Installation Guide:

 NeoSupreme Backrest Seat Cover, NeoSupreme Seat Bottom Cover, NeoSupreme Solid Bench Seat Cover and NeoSupreme Console Cover can be installed at ease by adopting specific installation procedures. The installation steps for all these seat covers are mentioned below:

NeoSupreme Backrest Seat Cover Installation:

1. You can successfully install the NeoSupreme Backrest Seat Cover over bucket seats with non-removable headrest by simply folding the seat forward and draping the NeoSupreme Backrest Seat Cover around the original seat cover.

2. In seats other than bucket seats with non-removable headrest, you can install the NeoSupreme Backrest Seat Cover successfully by pushing the flap through the opening between seat back and seat bottom and fixing the Velcro fastener after that. As soon as the Velcro fastener is attached, you can cover the original seat cover with the NeoSupreme Backrest Seat Cover at ease.

3. For the installation of NeoSupreme Backrest Seat Cover on older jeeps, just fold the seat forward and then drape the backrest seat cover around the car seat.

4.  You can also install the NeoSupreme Backrest Seat Cover easily over 60/40 split bench seats. For this purpose, first of all, you need to remove the headrest. Next, fold the seat properly forward and then push the flap through the opening between the seat back and seat bottom. Now, fasten the Velcro fastener and then drape the NeoSupreme Backrest Seat Cover around the original seat cover.

NeoSupreme Seat Bottom Cover Installation:

NeoSupreme Seat Bottom Cover installation process entails the following steps:

1. Fold the seat forward first and then drape the NeoSupreme Seat Bottom Cover around the original seat cover.

2.  Insert the flap through the fixed buckles and hooks and then you can easily hide the extra NeoSupreme Seat Bottom Cover behind the plastic pieces.

NeoSupreme Solid Bench Seat Cover Installation:

1. In the very first step, fold the seat forward and put the backrest seat cover over the backrest.

2. If your solid bench car seat is equipped with a headrest, then you need to remove the headrest first before draping the original car seat with your NeoSupreme Solid Bench Seat cover .However, if your car seat has a folding armrest, then place the backrest seat cover at a top position, above the armrest. 

3. Now, insert the flap through the opening between seat back and seat bottom, place the seat bottom cover over the seat bottom and fasten the straps.

NeoSupreme Console Cover Installation:

1. First of all, open the console and then cover the console top and the console bottom.

2.  Now, push the flap through the opening between the console top and console bottom and finally fasten the Velcro fastener.

Other Installation Instructions:

Only NeoSupreme Seat Covers designed with opening flaps are meant to cover seats equipped with integrated seat airbags. However, for successful installation of NeoSupreme Seat Cover with flaps, push the flap through the cut out in such a manner that it can be opened easily when in use.

You are required to make a small opening in your NeoSupreme Seat Cover to install it over levelers/ controls that are mostly used for your seat support.

Install the NeoSupreme armrest cover by fastening a Velcro fastener.

Leatherette Installation Guide:

You can install your Leatherette Seat Cover successfully without any hassle just by following the installation instructions detailed below.

Leatherette Backrest Seat Cover Installation:

You can successfully install the Leatherette Backrest Seat Cover over bucket seats with non-removable headrest by folding the seat forward first and then draping the Backrest Seat Cover around your car seat.

For the installation of Leatherette Backrest Seat Cover around certain other car seats, just insert the flap through the little opening between seat back and seat bottom and then affix the Velcro fastener. Thereafter, you can easily wrap the Leatherette Backrest Seat Cover around the original seat cover.

Install the Leatherette Backrest Seat Cover around older jeep seats by folding the seat first and then wrapping the Backrest Seat Cover around the original jeep seats.

For the installation of Leatherette Backrest Seat Cover on 60/40 split bench seats, first of all, remove the headrest. Then, fold the seat properly and insert the flap through the opening between seat back and seat bottom. Next, fasten the Velcro fastener and then place the Leatherette Backrest Seat Cover around the original car seat cover.

Leatherette Solid Bench Seat Cover Installation:

Leatherette Solid Bench Seat Cover installation process comprises of a few definite installation steps. These steps are described below:

Place your hands on the seat and fold it forward. Now, cover the backrest with the backrest cover.

If the Solid Bench Seat has an armrest, just place the backrest cover at the top position above the armrest and altogether if the Solid Bench Seat has a headrest, remove the headrest first and then only place the Leatherette Solid Bench Seat Cover around the original seat cover.

Leatherette Seat Bottom Cover Installation:

In the very first step, you need to fold the seat forward before proceeding to install the Leatherette Seat Bottom Cover around the original seat cover. 

After folding the seat forward and covering the original seat cover with the Leatherette Seat Bottom Cover, simply move on to insert the flap through the attached buckles and hooks. Then tuck the spare Leatherette Seat Bottom Cover behind the original plastic material.

Leatherette Console Cover Installation:

The Leatherette Console Cover installation procedure involves certain definitive steps that are mentioned below:

You need to open the console first and thereafter move on to wrap the Leatherette Console Cover around the console top as well as the console bottom.

Finally, after covering the console thoroughly with the Leatherette Console Cover, just pass the flap though the opening between console top and console bottom and fasten the Velcro fastener.

Other Leatherette Seat Cover Installation Instructions:

For the installation of your Leatherette Seat Cover around levelers/controls used to support your seat, you need to induce a small opening in your Leatherette Seat Cover.  

Use Leatherette Seat Cover equipped with opening flaps or airbag cut outs only to wrap around seats with integrated seat airbags. While installing this specifically designed Leatherette Seat Cover, push the flap through the cut out in such a way that it can be freely opened while in use.

For proper installation of Leatherette armrest cover, use the Velcro fastener.Cleaning Instruction:

Use a non-toxic, non-caustic, bio-degradable and anionic laundry detergent to clean your Leatherette Seat Cover and altogether for proper cleaning you need to use a high suction vacuum cleaner and undertake the cleaning process at around 20-27 degree centigrade. 

The Leatherette Seat Cover cleaning procedure is detailed below:

To cleanse your Leatherette Seat Cover properly, first of all, you have to treat your seat cover with the high suction vacuum cleaner and then wipe the seat cover with a wet tissue.

Next, immerse the Leatherette Seat Cover with a green-water-based anionic laundry detergent and then clean the seat cover with a wet tissue to extract the soap from it.

Now, you are required to wipe the Leatherette Seat Cover with a dry tissue or soft cotton fabric and then dry it by releasing air outside the vacuum cleaner.

These are the principal steps that you are required to follow properly for adequate cleansing of your Leatherette Seat Cover.  This cleaning procedure adequately safeguards the fabric finish of your seat cover.