Types of adhesives and what they do! (selector guide)

Cyanoacrylate adhesives (industrial superglue)

Single part adhesives that bond most materials,

Solvent and water free  with long shelf life (upto 7 years!)

Different thicknesses, gel (non drip), flexible grades, odourless grades are available!

Odourless grades are non foging on shiny surfaces and safe on foam polystyrene, and non irritant , no vapour!

Gel non drip formulations ideal for vertical surfaces and precision use

Thin, 0-4 seconds cure , virtualy instant, as fast and thin as you can get!

, Ideal for pre assembled parts, great on all woods metals, ceramics, stone, bone, grp, etc

Medium,3-7 seconds cure , medium thickness bonds as above

Thick, 6-12 seconds cure, gap filling grade bonds materials as above.

Odourless cyano,

Safe on sensitive materials such as expanded foams ,

depron styropor etc..,

Non whitening on clear materials eg. glass, perspex

and other shiny surfaces, Bonds all the other materials as well, great for model aeroplanes, car windscreens, hooks onto mirrors etc

Flexy cyanos, Available in clear or black formulations, ideal for use on flexible materials such as rubber, pvc, GRP etc, also ideal for high impact resistant bonds on amy material that a CA will bond, metals, wood, plastics, bone etc

Gell non drip CA adhesive, Gap filling and can even be applied to vertical surfaces and wont run or drip

Bonds the same meaterials as the above grades

Universal adhesive, bonds teflon, polypropylene, silicone, polyethylene , delrin as well as all other materials, see our plastic / universal bond pack / glue for teflon

Non clog applicator tips, ideal for preserving life of glue bottle and micro appication without spills!, shown on our old bottle, they fit the new bottle and most others!

filler powder, see kapow listings , high strength filler for use with cyanoacrylate

CA debonder, quickly removes cyano / superglues from most surfaces and fingers!

accelerator sprays are also available, non whitening unlike most other brands, the glue stays clear!

Epoxy resin adhesives

Better at filling gaps than CA (superglue) adhesives as they are a twin component mix that comes in a twin applicator to give a precise mix ratio, the `hardener` is mixed in making it set right through!

2, 5, 15, 30 and 60 min set formulations are available, all have the same exceptionaly high impact resistant bond strength with great water and heat resistance

Water proof and heat resistant!!!

Our epoxy resins bond to a wider range of plastics than most other epoxy adhesives due to unique formulation, they dry with a non tacky greasy surface and are highly impact resistant with very low odour.

Threadlockers and retainers

At StarLoc we manufacture all our adhesives in the UK, all our threadlockers and retainers are made to the same spec as the equiv. top brand grade (LOC***E)

We add a 9 at the start!

9-222 is the same as 222

9-242 is the same as 242

9-243 is the same as 243

9-601 is the same as 601

9-603 is the same as 603

	THREADLOCK , LOCK AND SEAL PRODUCTS		RETAINER PRODUCTS, BEARING FIT, SHAFT GRADE ETC
	Single part threadlock products for locking and sealing threaded parts against vibration loosening, vibration fatigue and stress cracking plus the added adventages of stopping leakage of fluids and gasses past the threads as well as preventing any build up of corrosion between the two threaded parts		Single part retainer products for bonding, locking and sealing turned parts, shafts, bearings ( non threaded parts ) , suitable for use on new parts, worn parts, against vibration loosening, vibration fatigue and stress cracking plus the added adventages of stopping leakage of fluids and gasses past as well as preventing any build up of corrosion between the parts.

	THREADLOCK , LOCK AND SEAL PRODUCTS
	Single part threadlock products for locking all threaded parts against vibration loosening and fatigue / wear plus the added adventages of stopping leakage of fluids and gasses past the threads as well as preventing any build up of corrosion between the two threaded parts.
	Threadlockers are 100% reliable unlike other methods of locking ( lock washers, split pins, nylon insert nuts etc... ) and because you can cut down on parts you can lower the costs of an ite