|
RC Simulator Cables & Controllers:
Here is
where it all started. Tom started to build simulator cables in 2001 and
selling the cables grew into this shop. The interfaces available are
USB, Serial, and the old Gameport (15 pin joystick). The cable will
connect to most transmitters' trainer port, including the AM oldies.
Connect your
transmitter's trainer port to the PC and practice flying (with the
freeware simulator FMS, CRRCSim, SSS and many others) before heading to
fields.
- USB Interface:
Windows (XP, Vista, 7), Linux
- Serial PIC Interface (98, ME, 2000, XP)
- Gameport (Joystick) Interface (98, ME, 2000 XP)
- Parallel Port Interface (98, ME)
For those new to the hobby without a
transmitter, we recommend the USB RC Simulator Controller: a Dummy
Transmitter
|
USB Servo Controllers:
We also
offer the USB Servo Controllers, popular with robotics, animatronics,
and unmanned vehicles (uav, ugv). Hobby style servos are everywhere,
moving everything! with these servo controllers, and some programming
skills, you can move the world. Whether you are moving a complex
animatronics puppet or an unmanned vehicle, the servo controller can do
it in either direct wiring to the servos or wireless modes. Multiple
controllers can be connected to one PC (up to 250, for moving 2000
servos!).
Use your PC to control hobby style servo motors.
Very complex motion can be programmed with simultaneous control of
all axis (using simple COM port programming). Featuring the industry
best control resolution (0.1 micro-seconds) and unique PPM output
(for wireless RF control of servos)
- SC-8000SP - with direct servo control and PPM output for
wirelessly controlling servos via popular transmitters.
- SC-8000S - with direct servo control only.
- SC-8000P - with PPM output only
|
) 
